BLOG

Lifetime Test Procedure
Vertiq’s lifetime test seeks to determine the life expectancy of its modules under realistic operating conditions.

Motor Commutation: FOC vs. FEC
Vertiq uses FEC, we are committed to making FEC meet or exceed all FOC performance numbers.

IP Ratings
Vertiq's modules come with a minimum standard protection of IP43. We have settled with this level of protection because Vertiq’s stock modules have been designed to accommodate industry-standard sizes and use cases.

Vertiq Communication Protocol: UAVCANv0
One of the communication protocols that Vertiq offers on its Vertiq 8108 module is UAVCANv0, which is a protocol designed for intra-vehicle communication that is built on top of the widely used CAN bus standard.

Increasing Usable Mission Time by 25%
Vertiq increases motor-controller efficiency by 10% compared to standard solutions by using an innovative control method called Field Estimated Control (FEC).

Position Sensing: Encoders & Linearization
The magnetic rotary encoder has been an integral part of Vertiq’s products from the beginning.

Cogging Torque & Anticogging
Using Vertiq’s Anticogging algorithm, it is possible to maintain the typical straight stack, straight magnet design that optimizes torque and efficiency, while also canceling out the vibration in software.